GX-16-12TS High Speed Follow Type Integrated Filling Capping
Machine uses SUS304 frame with excellent corrosion resistance.
Filling part is following type, driven by servo motor and volume
metering filling principle, which realizes high precision of
filling dosage. It adopts PLC control and HMI operating panel. The
performance has reached the highest level of similar models at home
and abroad.
The critical parts of mechanical transmission has protection
switch, if there is any abnormal situation during running, the
machine will automatically stop and alarm, to protect the equipment
from damage and improve the service life.
3. Advanced Features
3.1. High Speed: hourly speed 10000 bottles, one filling line can
replace more than 2 filling lines.
3.2. Small Space Occupation: for the same capacity, the space
occupation rate can be reduced by 50%, the efficiency can be
improved by 50%.
3.3. The machine has auto following type diving filling mechanism,
the product can be filled during conveying, this will greatly
reduced the stop time during filling process. Filling heads go deep
inside the bottles, there will be no leakage.
3.4. Quick Changeover design without using any tools when doing
changeovers. Molds are marked according to different bottle, this
will make the changeover easier and shorten the changeover time.
3.5. High Precision: 100ml pistons make sure the filling precision
of small volume.
3.6. High Qualification Rate: The capping heads use the magnetic
torque control design. Capping tightness (capping torque) can be
adjusted and controlled. This will make sure the same, stable
torque and 100% qualification rate. Meanwhile, there is no
consumable parts like the friction disk to reduce the cost.
3.7. It has online non aluminum foil inspection, the caps without
aluminum foil will be rejected automatically, this will make sure
the high qualification rate.
3.8. It has inspection device to the falling down and jammed
bottles at the bottle feeding side. The machine will automatically
stop if there is any falling down or jam, to protect the bottle
feeding screw and star-wheel.
3.9. Liquid tray is installed on the machine to collect the drips,
dustproof cover on the top meets the requirements of sanitary
filling.
3.10. Overload protection is installed on the star-wheel in and out
to protect the safe operation of the equipment.
3.11. Door Limit Protection: Safety door limit alarm device is
installed on the machine, when opening the doors during normal
operation, the machine will alarm and stop. (Optional function)
3.12. The control system uses France Schneider, the integrated
control system is more stable, safe, green and low energy
consumption.
